Victron - Blue Smart IP22 Charger 12/30(1) 230V CEE

Blue Smart charger - 12V, 30A, 1 output

Bluetooth Smart
The Blue Smart IP22 battery charger is the wireless solution for monitoring voltage and current, adjusting settings and updating the charger.
settings and to update the charger when new functions are available.

High efficiency
With an efficiency of up to 94%, these chargers generate up to four times less heat compared to the industry standard.
Furthermore, once the battery is fully charged, power consumption drops to less than 0.5 watts, which is around five to ten times better than the industry standard.
ten times better than the industry standard.

Adaptive 6-stage charging algorithm: Test - Bulk - Absorption - Recondition - Float - Storgage
The Blue Smart charger is characterized by its microprocessor-controlled, "adaptive" battery management. "Adaptive" means
that the charging process is automatically adapted to the type of battery use.

Storage mode: Less maintenance and ageing when the battery is at rest:
Storage mode is always activated if no discharge has taken place within 24 hours. The
voltage is then lowered to 2.2V/cell (13.2V for a 12V battery) to minimize gas generation and thus prevent corrosion on the positive plates.
to prevent corrosion on the positive plates. Once a week, the voltage is increased to the level of the gassing voltage.
This achieves a kind of equalizing charge that prevents electrolyte stratification and sulphation - the two main causes of premature battery failure.
battery failure.

Also charges lithium-ion (LiFePO4) batteries
LiFePO4 batteries are charged using a simple constant current phase - constant voltage phase - float voltage phase
algorithm.

The NIGHT and LOW settings
If the device is in NIGHT or LOW mode, the output current is reduced to a maximum of 50% of the nominal output and the charger operates absolutely silently.
charger operates absolutely silently. NIGHT mode ends automatically after 8 hours. LOW mode can be ended manually.

Protection against overheating
The output current is reduced if the temperature rises to 50°C, but the Blue Smart charger does not fail.

Eleven LEDs for status display
Charging algorithm: TEST / BULK (CONSTANT CURRENT PHASE) / ABSORPTION (CONSTANT VOLTAGE PHASE/ RECONDITION (REGENERATE) /
FLOAT (FLOAT CHARGE PHASE) / STORAGE (STORAGE MODE) / READY (READY)
MODE button settings: NORMAL (14.4V) / HIGH (14.7V) / RECONDITION (REGENERATION) / LI-ION


Input voltage range: 180 - 265 VAC
Charging current, normal mode: 30A
Charging current, NIGHT or LOW: 15A
Efficiency: 93%
Power consumption without load: 0.5 W
Frequency: 45 - 65 Hz
Number of outputs: 1
'Constant' charging voltage: Normal: 14.4V High: 14.7V Li-ion: 14.2V
'Float' charging voltage: Normal: 13.8V High: 13.8V Li-ion: 13.5V
'Storage' charging voltage (Storage): Normal: 13.2V High: 13.2V Li-ion: 13.5V
Charging algorithm: six-stage, adaptive
Can be used as a power supply: Yes
Protection: Reverse polarity on battery (fuse) Output short circuit Overtemperature
Operating temperature range: -20 to +50?
Humidity (non-condensing): Max 98%
Housing material & color: Aluminum (blue RAL 5012)
Battery connection: Screw terminals 13 mm²/AWG6
230 V AC connection: 1.5 meter cable with CEE 7/7 plug
Protection class: IP22
Weight: 1.3 kg
Dimensions (HxWxD): 235 x 108 x 65 mm