Product description
ARGO FET charging current distributor - WITHOUT VOLTAGE LOSSES
Similar to isolating diodes, FET isolators allow simultaneous charging of two or more batteries through a generator or charger connection without connecting the batteries to each other. A discharge of the on-board battery does not lead to a simultaneous discharge of the starter battery.
In contrast to isolating diodes, there is practically no voltage loss with FET isolators. The voltage drop is less than 0.02 V at low currents and only 0.1 V at higher currents. With ARGO FET battery isolation, no voltage increase is required. However, short cable lengths and sufficient cross-sections should be ensured.
-Type: Argofet 100-3
-Maximum charging current: 100 A
-Maximum alternator current: 100 A -Number of batteries: 3
-Connection: M8 bolt
-Weight: 1.4 kg
Dimensions (HxWxD): 65 x 120 x 200 mm
Similar to isolating diodes, FET isolators allow simultaneous charging of two or more batteries through a generator or charger connection without connecting the batteries to each other. A discharge of the on-board battery does not lead to a simultaneous discharge of the starter battery.
In contrast to isolating diodes, there is practically no voltage loss with FET isolators. The voltage drop is less than 0.02 V at low currents and only 0.1 V at higher currents. With ARGO FET battery isolation, no voltage increase is required. However, short cable lengths and sufficient cross-sections should be ensured.
-Type: Argofet 100-3
-Maximum charging current: 100 A
-Maximum alternator current: 100 A -Number of batteries: 3
-Connection: M8 bolt
-Weight: 1.4 kg
Dimensions (HxWxD): 65 x 120 x 200 mm
Last viewed:
A product slider follows - use the tab key to navigate to the individual articles.
Victron - Argofet 100A for 3 batteries
