NAVICO - DST810 transducer - Depth, Speed, Temperature - Smart

The DST810 provides depth, speed and temperature data with just one hull penetration.
The signal processing integrated in the transducer makes the data available in NMEA2000 format in the connected network.
The data can be displayed by chart plotters, radar units or various instrument systems.
This means that this transducer can also be used for all suitable display devices from other manufacturers such as Raymarine, Garmin or Furuno.

With little installation effort, your chart plotter, for example, can be expanded to include an echo sounder and log function.

NEW - The wireless Bluetooth connection to Airmar's CAST app offers new user-friendly benefits:
- Calibrate the DST810 in a simple and intuitive way, regardless of the instrument brand or model on board
- Perform basic and advanced heel-compensated speed calibrations to improve performance across the entire speed range
- Advanced speed calibration allows manual speed inputs for multiple heel angles and up to 10 speeds, previously only possible via expensive PC software
- Enable and disable PGNs and set offset and output rates
BTLE connection range: approx. 10 meters, depending on installation location.

- Frequency: 235 kHz
- Plumb depth approx. (min./max.): 0.5 m / 100 m
- Fuselage angle at installation location up to 22° possible
- Power supply: 9 - 16 V DC, <200 mA, integrated via NMEA2000 network
- Connection cable/connector: 6 m, Micro-C connector for connection to N2K or NMEA2000 network
- Plastic sleeve with 51 mm diameter

Since 2022 with newly shaped Gen2 paddle wheel, which significantly improves the display accuracy, especially at low speeds.

Manufacturer: AIRMAR for Navico (Simrad, Lowrance, B&G)
Manufacturer part numbers: DST810-PV-N2 / IDST810-40-01